SARA-G3 and SARA-U2 series - System Integration Manual
UBX-13000995 - R26
Approvals
Page 182 of 217
4.2.3
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not
expressly approved by u-blox could void the user's authority to operate the equipment.
Manufacturers of mobile or fixed devices incorporating SARA-G310 / SARA-G350 / SARA-U201 /
SARA-U260 / SARA-U280 modules are authorized to use the FCC Grants of the SARA-G310 /
SARA-G350 / SARA-U201 / SARA-U260 / SARA-U280 modules for their own final products
according to the conditions referenced in the certificates.
The FCC Label shall in the above case be visible from the outside, or the host device shall bear a
second label stating:
For SARA-G310 and SARA-G350 modules: "Contains FCC ID: XPYSARAG350" resp.
For SARA-U201 modules: "Contains FCC ID: XPY1CGM5NNN" resp.
For SARA-U260 modules: "Contains FCC ID: XPYSARAU260" resp.
For SARA-U280 modules: "Contains FCC ID: XPYSARAU280" resp.
4.3
Innovation, Science and Economic Development Canada notice
ISED Canada (formerly known as IC - Industry Canada) Certification Numbers:
For SARA-G310 modules: 8595A-SARAG350
For SARA-G350 modules: 8595A-SARAG350
For SARA-U201 modules: 8595A-1CGM5NNN
For SARA-U260 modules: 8595A-SARAU260
For SARA-U280 modules: 8595A-SARAU280
4.3.1
Declaration of conformity
These devices comply with Part 15 of the FCC rules and with the ISED Canada licence-exempt RSS standard(s)..
Operation is subject to the following two conditions:
this device may not cause harmful interference
this device must accept any interference received, including interference that may cause undesired operation
Radiofrequency radiation exposure Information: this equipment complies with radiation
exposure limits prescribed for an uncontrolled environment for fixed and mobile use conditions.
This equipment should be installed and operated with a minimum distance of 20 cm between
the radiator and the body of the user or nearby persons. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter except in
accordance with ISED procedures and as authorized in the module certification filing.
The gain of the system antenna(s) used for SARA-G310 / SARA-G350 modules (i.e. the combined
transmission line, connector, cable losses and radiating element gain) must not exceed 8.39 dBi
(850 MHz) and 3.11 dBi (1900 MHz) for mobile and fixed or mobile operating configurations.
The gain of the system antenna(s) used for SARA-U201 modules (i.e. the combined transmission
line, connector, cable losses and radiating element gain) must not exceed 0.61 dBi (850 MHz)
and 1.51 dBi (1900 MHz) for mobile and fixed or mobile operating configurations.
The gain of the system antenna(s) used for SARA-U260 modules (i.e. the combined transmission
line, connector, cable losses and radiating element gain) must not exceed 3.5 dBi (850 MHz) and
3.1 dBi (1900 MHz) for mobile and fixed or mobile operating configurations.
