NINA-B50 series - Hardware integration manual
UBX-22021116 - R02
Pre-approved antennas list
Page 51 of 57
C1-Public
Wi-Fi / Bluetooth / Bluetooth LE external whip antenna, PN PRO-EX-333
Manufacturer Abracon
Polarization Vertical
Gain
+3.0 dBi
Impedance
50
Ω
Size
Ø 10 x 83 mm
Type
Monopole
Connector
Reverse Polarity SMA plug (inner thread and pin receptacle)
Comment
To be mounted with a U.FL to Reverse Polarity SMA adapter cable.
An SMA version antenna is also available but not recommended for
use (PN PRO-EX-332).
Approval
FCC, IC, RED, UKCA, MIC, NCC, KCC and ACMA
Wi-Fi / Bluetooth external whip antenna, PN PRO-EX-327
Manufacturer Abracon
Polarization
Vertical
Gain
+3.0 dBi
Impedance
50
Ω
Size
Ø 9.4 x 70.5 mm
Type
Monopole
Cable length 100 mm
Connector
U.FL. connector
Comment
To be mounted with a U.FL connector.
For information on how to integrate the U.FL connector, see
RF
connector design
.
Approval
FCC, IC, RED, UKCA, MIC, NCC, KCC and ACMA
Wi-Fi / Bluetooth / Bluetooth LE board antenna, PN PRO-IS-237
Manufacturer Abracon
Gain
+3.0 dBi
Impedance
50
Ω
Size
27 x 12 mm (triangular)
Type
Patch
Cable length 100 mm
Connector
U.FL. connector
Comment
Should be attached to a plastic enclosure or part for best
performance.
To be mounted with a U.FL connector.
For information on how to integrate the U.FL connector, see
RF
connector design
. This reference design must be followed to
comply with the NINA-B50 FCC/IC modular approvals.
Approval
FCC, IC, RED, UKCA, MIC, NCC, KCC and ACMA
