LISA-U series - System Integration Manual
UBX-13001118 - R17
Advance information
System description
Page 122 of 190
LISA-U230: "Contains FCC ID: XPYLISAU230" resp.
LISA-U260: "Contains FCC ID: XPYLISAU200" resp.
LISA-U270: "Contains FCC ID: XPYLISAU200" resp.
The IC Label shall in the above case be visible from the outside, or the host device shall bear a
second label stating:
LISA-U100: "Contains IC: 8595A-LISAU120" resp.
LISA-U120: "Contains IC: 8595A-LISAU120" resp.
LISA-U200, except LISA-U200-00S: "Contains IC: 8595A-LISAU200N" resp.
LISA-U200-00S: "Contains IC: 8595A-LISAU200" resp.
LISA-U201: "Contains IC: 8595A-LISAU201" resp.
LISA-U230: "Contains IC: 8595A-LISAU230" resp.
LISA-U260: "Contains IC: 8595A-LISAU200N" resp.
LISA-U270: "Contains IC: 8595A-LISAU200N" resp.
Canada, Industry Canada (IC) Notices
This Class B digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B) and RSS-210.
Operation is subject to the following two conditions:
o
this device may not cause interference
o
this device must accept any interference, including interference that may cause undesired
operation of the device
Radio Frequency (RF) Exposure Information
The radiated output power of the u-blox Cellular Module is below the Industry Canada (IC)
radio frequency exposure limits. The u-blox Cellular Module should be used in such a manner
such that the potential for human contact during normal operation is minimized.
This device has been evaluated and shown compliant with the IC RF Exposure limits under
mobile exposure conditions (antennas are greater than 20cm from a person's body).
This device has been certified for use in Canada. Status of the listing in the Industry Canada’s
REL (Radio Equipment List) can be found at the following web address:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Additional Canadian information on RF exposure also can be found at the following web
address: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
IMPORTANT: Manufacturers of portable applications incorporating the LISA-U modules are
required to have their final product certified and apply for their own FCC Grant and Industry
Canada Certificate related to the specific portable device. This is mandatory to meet the SAR
requirements for portable devices.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Canada, avis d'Industrie Canada (IC)
Cet appareil numérique de classe B est conforme aux normes canadiennes CAN ICES-3 (B)/NMB-
3(B) et RSS-210.
Son fonctionnement est soumis aux deux conditions suivantes:
o
cet appareil ne doit pas causer d'interférence
o
cet appareil doit accepter toute interférence, notamment les interférences qui peuvent
affecter son fonctionnement
Informations concernant l'exposition aux fréquences radio (RF)
La puissance de sortie émise par l’appareil de sans fil u-blox Cellular Module est inférieure à la
limite d'exposition aux fréquences radio d'Industrie Canada (IC). Utilisez l’appareil de sans fil u-
blox Cellular Module de façon à minimiser les contacts humains lors du fonctionnement normal.
Ce périphérique a été évalué et démontré conforme aux limites d'exposition aux fréquences
radio (RF) d'IC lorsqu'il est installé dans des produits hôtes particuliers qui fonctionnent dans
des conditions d'exposition à des appareils mobiles (les antennes se situent à plus de 20
centimètres du corps d'une personne).
