1
Robotclean Accu Operating Instructions and Parts List
Dear Customer,
Thank you for choosing our product to clean your pool entirely without cables or connection to the power.
We hope you enjoy your new pool cleaner when looking after your swimming pool in forthcoming years.
Take a few minutes before using your RobotClean Accu for the first time and read the operating instructions carefully.
Scope of delivery
1 Pool RobotClean Accu
1 battery charger
1 pull cord 2.3 m
1 driving handle (red)
2 brushes
1 operating instruction booklet
DO NOT ENTER THE POOL WHEN THE CLEANER IS IN USE
Technical Data
List of Components
Ref.-Nr.
Description
Ref.-Nr.
Description
1
Side Cover
9
Safety Screen
2
Floating Handle
10
Spring
3
Housing - Upper Part
11
Filter Element
4
Connecting Rod 1
12
Water Inlet Grid
5
Swing Flap
13
Housing - Lower Part
6
Connecting Rod 2
14
Wheel
7
Control Nozzle
15
Brush
8
Drive Unit
16
Pull Cord
IMPORTANT SAFETY NOTES
- Take note of all safety notes and instructions stated on the charging adapter and pool cleaner. Non-compliance can result in serious injury or damage to property.
- This appliance is suitable for cleaning water at temperatures between min. 5° C and a maximum of 45° C.
- When charging, the appliance may be connected only to an earthed AC 230 V shockproof socket
(residual current circuit breaker with a rated residual current of no more than 30 mA).
- The power supply for the charging adapter must be at least 3.5 metres away from the pool.
- The pool cleaner must be used only for cleaning private swimming pools. All other usage results in the immediate expiry of the warranty.
- The pool cleaner is not suitable for pools with a membrane thickness under 0.4 mm. The use of the pool cleaner below this film thickness is at your own risk.
- The pool cleaner must not be used when there are people in the pool.
- The insulated drive unit and the charging adapter do not have components, which need servicing. Only expert technicians may open these parts.
The guarantee expires otherwise.
- During the cleaning process some lubricants may leak from the motor oil seal, which might result in slight contamination of the water.
LITHIUM BATTERY/BATTERY CHARGER
Input Voltage
100-240 VAC / 50-60 Hz
Output Voltage
12,6 V / 1,8 A
Battery Capacity
6600 mAh
Protection Class
II
Protection Type
IP20
Battery Life
max. 2 hours
Battery Charging Time
5-6 hours
Operating Temperature (Charging Adapter)
0°C - 45°C
Storage Temperature (Charging Adapter)
20°C - 45°C
POOL ROBOT CLEAN ACCU
Input Voltage
12,6 VAC / 50-60 Hz, 50 Watt, 1.8 A
Protection Class
III
Protection Type
IPX8
Immersion Depth
max. 2 m
Working Temperature
10°C - 35°C
Storage Temperature
20°C - 45°C
Safety System
Yes (Overload Protection)
Type of Cleaning
Floor
Cleaning Area
ca. 50m
2
Cleaning Time
max. 2 h
Speed
approx. 16m/min
Filtration Grade
100 Micron
Suction Power
approx. 10 m3/h
Manual RobotClean Accu new 1.indd 1
15.08.19 11:47