UAS CLARCOR SDC Series Скачать руководство пользователя страница 4

Страница: 4 / 24

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electric shock, or injury when using your dust collector, follow these basic precautions:

SAFETY PRECAUTIONS

We have provided important safety messages in this manual for your SDC dust collector. Always read and obey all safety

messages.

• Wear protective clothing and safety glasses when

handling collection filters or servicing the dust

collector.

• Use proper lifting and rigging equipment to install

your dust collector.

• The dust collector must be properly grounded.
• Disconnect power before servicing.
• Replace all access panels before operating.
• Electrical connections should only be made by

qualified personnel, and be in accordance with

local and national codes and regulations.

• Do not use in explosive atmospheres unless the

dust collector is equipped with the appropriate

accessories.

• Keep flammable materials and vapors, such as

gasoline, away from the dust collector.

• The unit should be inspected frequently and dirt

removed to prevent excessive accumulation

which may result in flash-over fire damage.

• The SDC system should not be used to support

personnel or material.

• Operate only in a safe and serviceable condition.
• Do not allow any individual to put lit cigarettes or

any burning objects into the hood or ducting of

a dust collector system.

DA N G E R

WARNING

C AU T I O N

C A U T I O N

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow

the safety alert symbol and the word “DANGER”, “WARNING”, or “CAUTION”. These words mean:

Indicates a hazardous situation which, if not avoided, will result in death or

serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in

death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in

minor or moderate injury.

CAUTION used without the safety alert symbol indicates a potentially hazardous

situation which, if not avoided, may result in property damage.

Содержание CLARCOR SDC Series

























Результаты поиска

Содержание CLARCOR SDC Series

Отзывы:

Похожие инструкции для CLARCOR SDC Series

Бренды по названию

Популярные бренды

UAS CLARCOR SDC Series, Руководство пользователя

Результаты поиска

Содержание CLARCOR SDC Series

Отзывы:

Похожие инструкции для CLARCOR SDC Series

Бренды по названию

Популярные бренды