press
and
hold“ON”button
under
weighing
interface,
the
balance
enter
s
into
the
main
menu
mode.
release“ON”button un
til
the
display
shows
“SET-T”,
Time setting
press and hold“PRINT”button to enter into clock setting, the display shows“-CLOC-*-”.
press and hold“PRINT”button to set up time, display shows:
second
minute
hour
Press “CAL” button to increase, press“ON”button to decrease.
press“TARE”to save the setting and exit.
Interface
- CLOC
- CLOC
- CLOC
4. OPERATION
RS232 interface
- Connection
Balance (9 pins)
PC/Printer (9 pins)
RXD (Input)
2
2
TXD (Output)
3
3
GND (Ground)
5
5
- Output data format
Type
or
Àda ta
data
data
data
data
data
data
data
unit
unit
unit
return
data
or
dot
data
or
dot
Line
feed
- The baudrate by default is 9600 bps (see Baudrate setting)
- Data format: 10 bits, 0 as start bit, 1 as stop bit, 8 digits (ASCII code) - No odd and even
numbers adjusting
- Data output: by default is continuous mode. The data ouput mode can be changed into
press output, timing output and continuous output (see Data output setting)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
