FUNCTION SETTINGS
1.
Enter function setting mode.
Press
[ON/OFF]
to turn the power off, Press
[PCS]
first, then press
[ON/OFF]
,
while keeping
[PCS]
pressed, the display will show
A_ON
or
A_OFF
.
2.
Selection of auto backlight mode.
When the balance is enter function setting menu. Press
[PCS]
key, the display will
show
L_ON
or
L_OFF
, press
[ZERO]
, selection display
L_ON
, this means auto
backlight function active, press
[ZERO]
again, the display will show
L_OFF
, this
means auto backlight function inactive, i.e. shut off backlight function.
3.
Selection of auto shut off mode.
When the balance is enter function setting menu. Press
[PCS]
key, the display will
show
A_ON
or
A_OFF
, press
[ZERO]
, selection display
A_ON
, this means auto
shut off function active. Press
[ZERO]
again, the display will show
A_OFF
, this
means auto shut off function inactive.
4.
Return to weighing mode.
Press
[ON/OFF]
to turn the power off, press
[ON/OFF]
again to turn on the power
and the scale return to the weighing mode.
Counting procedures
1. Press [ON/OFF] to turn on the scale.
Wait for "0" to appear on the display.
2.Start the Count Procedure
If necessary, press
[ZERO]
key to set the display to “0”.
3.
Place a given number of samples of an item on the pan (the Sample Size should be
either 10, 20, 50 or 100 pieces). The weight of these samples will show on the display.
4.
Press the
[PCS]
key to put the scale in PCS mode.
5.
Select the sample size (the same as you chose above) by pressing the
[PCS]
key.
(press it as many times as necessary to put it in the correct sample size ,the sample size
is the same as in step three =10, 20, 50 or 100.
6.
Press the
[UNIT]
key, the display will show “
selected pcs
”, Press [PCS] key, the
display will show “
PASS
” then the scale will remember the sample size you selected and
show the starting sample size on the display
(you can now remove the samples if you want to return the scale to 0)
7.
Place the items that you want counted onto the tray and the total number of items will
show on the display.
8.
Presses the
[PCS]
key to exit the counting function and return to normal weighing or
you can press
ON/OFF
to turn the scale off to exit .
NOTE: the weight of unit sample > 10e.
LIGHT WASH DOWN BALANCE
PWBWS series
INSTRUCTION MANUAL
http://www.balances.com
