U-Reach Silver Fox PRO, Руководство пользователя

Страница: 30 / 40

4
Function Overview
30
4.5.5 Check Before Copy
You can select "Do Check" if you would like to check whether the flash media is workable
before copying.
4.5.6 Power Off Time Between Copy&Compare
This setting is to prevent from any data loss because of unstable flash, we strongly
recommend you to enter this function to set the time gap of power supply between copy
and compare.
The time gap can be set from 0 to 15 seconds.
The default setting is "0".
4.5.7 Auto Start After Fill Device
Set if immediately start “copy" or "compare” tasks once plugging in all targets. Or, set to
press "OK" key to confirm.
4.5.8 Language
To set the system’s language interface, i.e. English, Japanese.
4.5.9 Select Speed
The working mode has 5 options to select the transmission speed:
◦
Slowest Mode
◦ Slower Mode
◦
Normal Mode (Default setting)
◦
Faster Mode
◦ Fastest Mode
Please make sure your flash media has good quality and support faster mode. If you are
not confident on the flash quality or you find a high failure rate on copy or compare. It is
recommended to slow down the working mode. The factory default setting is "Normal
Mode".
4.5.10 Set HDD Mode
This is the setting when users want to copy USB-HDD. To copy USB-HDD, users could
select "Active Mode" first and then start executing other operation. Or, if users just want to
copy USB devices but not USB-HDD, just select "Inactive mode".
Note:
The reason to make this setting before copying USB HDD is not only because USB HDD requires more power
but also because it has different file format with USB flash stick.
4.5.11 Advanced Setup
Choose LED mode to either Traditional mode or Factory mode, "Factory #1 (Both off)",
"Factory #2 (Both on)".