U-Reach Silver Fox PRO, Руководство пользователя

Страница: 13 / 40

3
Operation Guide
13
1.2 The Setting Related to Copy Result
There are several sub-functions related to the results of copy, users could adjust them in
function "4.5 Setup" to meet the needs before copy.
1.2.1. Copy Area Settings
(Function4.5.1)
a. Copy Area : System and Files
It is also called "Quick Copy" mode. The system will
automatically analyze the source flash card's file format.
If the data's file format is FAT16/32, NTFS, Linux (ext2,
ext3, ext4) which is recognizable by the system, it will
be able to copy data only instead of the whole flash.
Note:
If the file format is non-recognizable, the system will still copy the
whole flash card including the empty space even that you select
"System and Files" as your copy area.
b. Copy Area : Whole Media
The system will copy the whole flash card, including the
empty space and format. This function is used when
users want to copy the whole flash or have a flash
source with unknown format. It will take longer time to
make "Whole media" copy.
1.2.2. Target Tolerance Settings
(Function4.5.3)
This function is to set the acceptable difference range of flash capacities between the source
and target. If the capacity difference between the source and target exceeds the tolerance
setting, the copy will fail.
For example, if the target tolerance setting is "
±
1%", the targets whose capacities are
more than 2.02GB or less than 1.98GB won't be able to be copied.