U-Reach Silver Fox PRO, Руководство пользователя

Страница: 22 / 40

4
Function Overview
22
4.2.3 H6 SafeRW 100%
This function is used to check the flash's quality by writing and reading data on the empty
space of flash media. Select "4.2.3 H6 SafeRW" and press "OK" to start executing this
function. After finishing this task, the system will show the testing result. Users can use
▲▼
buttons to check the status of each port.
Note:
This function will NOT change the content of flash media.
4.2.4 Setup Range%
This function is to set the % of flash’s range that you would like to check for its quality. Using
▲▼
button to set the examined range from 1% to 100%. 100% means to check the whole
flash, and it will take more time.
4.2.5 Setup Range MB
This function is to set the flash’s range(MB) that you would like to check for its quality. Using
▲▼
button to set the examined range from 1MB to 9000MB.
Note:
Function "Setup Range %" & "Setup Range MB" may conflict with each other. The duplicator will follow the
latest setting if users set both of these two functions.
4.2.6 Setup ErrorLimit
This function is to set the % of tolerance range of error when checking the flash. User can
use
▲▼
button to set the error limit value.
Use ▲▼ button to set the error limit value.