U-Reach Silver Fox PRO Скачать руководство пользователя страница 26

Страница: 26 / 40

Function Overview

Note:

❶

This function supports asynchronous operation, you can continuously plug in and pull out flash media

without pushing any buttons.

❷

The function may change the content of data and format of flash.

❸

To protect source data, the system will not do Capacity Check on the master device.

❹

When the Red light illuminates (Error), you can use

▲▼

to check the error information.

4.4.4 Quick Erase

This function will erase flash’s data, and it will keep the format if the original format of flash
is FAT16/32. User can use

▲ ▼

button to check each flash media’s erasing status, progress

and information.

Note:

❶

Quick erase function can only erase the flash which is FAT 16/32 format.

❷

It will damage the data in flash, please make sure you have backup all important data before using this

function.

❸

If user pulls out the flash card during erase process, the system will stop immediately and red light will on

accordingly to notice user this erase function failed. And, we strongly suggest user avoid this action because
it will damage flash card easily.

4.4.5 Full Erase

It will completely erase the whole flash media, including format and content. Therefore
full erase will take more time. During the process, you can use "ESC" to stop the erasing
process, but the original format and content can’t be read any more.

Note:

❶

It will damage the data in flash, please make sure you have backup all important data before using this function.

❷

If user pulls out the flash card during erase process, the system will stop immediately and red light will on accordingly

to notice user this erase function failed. And, we strongly suggest user avoid this action because it will damage flash
card easily.

Содержание Silver Fox PRO









































Результаты поиска

Содержание Silver Fox PRO

Отзывы:

Похожие инструкции для Silver Fox PRO

Бренды по названию

Популярные бренды

U-Reach Silver Fox PRO, Руководство пользователя

Результаты поиска

Содержание Silver Fox PRO

Отзывы:

Похожие инструкции для Silver Fox PRO

Бренды по названию

Популярные бренды