U-Reach Silver Fox PRO, Руководство пользователя

Страница: 23 / 40

4
Function Overview
23
4.2.7 Minimum Read Speed
This function can be used to select the flash media whose reading speed is too low. Users
can set an expected minimum reading speed first when doing media check, and the flash
media which doesn’t reach the minimum speed value will be picked out.
Use
▲▼
button to adjust the speed limit
4.2.8 Minimum Write Speed
This function can be used to select the flash media whose writing speed is too low. Users
can set an expected minimum writing speed value first when doing media check, and the
flash media which doesn’t reach the minimum speed value will be picked out.
Use
▲▼
button to adjust the speed limit
Note:
When the Red light illuminates (Error), you can use ▲▼ to check the error information.
4.2.9 Set Capacity Check
This function can be used to set capacity range for the purpose of checking flash device.
Users can set upper limit and then lower limit of flash capacity. Users can set upper limit and
lower limit after entering this function. Or clear limit to reset the function.
Use
▲▼
button to set upper limit
Use ▲▼ button to set lower limit