25
6.8.10 Transfer Rate
Allows user to select the transfer rate.
Scroll to select "Transfer Rate”, then press "OK". Select the desired transfer mode from
UDMA2 to 7. The default is UDMA7.
6.8.11 Stop Motor Time
Sets device power down buffer time when tasks are completed.
Scroll to select "Stop Motor Time”, then press "OK" to set buffer time from 1 to 20 seconds.
The default is 3 seconds.
6.8.12 Bytes Per Cmd
Set the size of the data transfer between the duplicator and the HDD. The setting value is
form 512Byte to 16Mbyte.
6.8.13 Delete Device Signature After Copy
Set at “Yes” means do not copy the disk signature part.
This function is for Windows only. Windows will only recognize one device if you connect
two or more with the same disk signature.
6.9 Restore Defaults
Restores all settings back to manufacturer defaults.
Scroll to select "Restore Defaults”, then press "OK" to restore settings back to manufacturer
defaults.
Caution
“Compare” function will always Fail if “Delete Disk Signature After Copy” is set
at “Yes.”
