18
- 6.4 Skip Bad Sectors
- 6.5 Minimum Speed
- 6.6 Check Source Minimum Speed
- 6.8.1 Unknown Format
- 6.8.7 HPA Copy Mode
Using appropriate copy modes can greatly reduce operation time and increase efficiency.
There are four copy modes with different copy methods.
System and Files
Copies data and skips empty space. Only supports standard formats.
Scroll to select “6.2 Copy Area > System and Files”, then press “OK” to save the copy
method.
Allows user to copy source device’s System and Files, instead of the entire device. The
system will analyze the source device and identify the data area to copy. If the source
device’s data is within the target device’s capacity, the copy will be processed. FAT16/32/64,
NTFS, EXT2/EXT3/EXT4/lvm, and HFS/HFS+/HFSX are supported in this copy mode.
All Partitions
Copy or skip HPA, DCO, unknown partitions, modified formats, etc. defined by settings.
Scroll to select “6.2 Copy Area > All Partitions”, then press “OK” to save the copy method.
The target device’s capacity must be equal to or larger than the source device’s capacity.
