14
4.2 Full Erase
This function will erase all data per NIST 800-88 Standards on the connected device(s).
Scroll to select "Full Erase”, then press "OK" to start the erasing process.
4.3 DoD Erase
This function will erase all data per DoD 5220.22-M Standards on the connected device(s).
Scroll to select "DoD Erase", then press "OK" to start the erasing process.
4.4 DoD EraseComp
This function will erase all data per DoD 5220.22-M Standards, then compare erasure of the
connected device(s).
Scroll to select "DoD EraseComp", then press "OK" to start the erasing and verifying process.
4.5 7-Pass Erase
This function will erase device(s) 7 times complying with DoD 5220.22-M(ECE) Standards.
Scroll to select "7-Pass Erase", then press "OK" to start the erasing process.
4.6 Secure Erase
This function erases the non-loadable areas complying with NIST 800-88 Standards.
Scroll to select "Secure Erase ", then press "OK" to start the erasing process.
Caution
If Secure Erase process is interrupted, the device will be locked. Please
execute again and wait until it finishes.
4.7 Enhanced Secure Erase
This function erases devices that supports this feature.
Scroll to select "Enhanced Secure Erase", then press "OK" to start the erasing process.
Note
Although Secure Erase/ Enhanced Secure Erase is a command of the SATA-
specification, not all SATA devices can support it. When a device that cannot
be supported is encountered, the LCD will display Not Support!
