u-line.com
15
General Information
Relay Toggle
Relay toggle is used to manually switch the state of each relay to test
for proper operation. In addition to the AC relays, DC outputs may
also be toggled. Relay toggle can also be used to force the unit into a
particular state. For example, to force a 3018 / 3045 into a cooling
cycle activate Comp, F1, and F3.
To access Relay Toggle
1. Use Down
to select “Relay Toggle”.
2. Press Select
.
3. Use Up
and Down
to scroll through each relay or DC
output.
4. Press Select
to toggle.
To exit the Relay Toggle menu use Up
to select “Return to Menu”
and press Select
to confirm.
Input Status
Input status displays the current state of each available input as well as
the current USB connection state.
Note:
USB status shows current connection state. In order to make a
successful connection USB connection type must be properly set in
“USB Port” under the service menu.
To access Input Status
1. Use Down
to select “Input Status”.
2. Press Select
.
3. Use Up
and Down
to scroll through available information.
To exit the Input Status menu use Up
to select “Return to Menu”
and press Select
to confirm.
Outputs
Outputs is used to monitor the state of DC outputs.
To access Outputs
1. Use Down
to select “Outputs”.
2. Press Select
3. Use Up
and Down
to scroll through available information.
To exit the Outputs Status menu use Up
to select “Return to
Menu” and press Select
to confirm.
ID
Description
Type
Mull
Mullion Heater (Not Used)
AC
Cond
Fan (Not Used)
AC
Def
Defrost Valve (Not Used)
AC
LVLV
Left Valve (Not Used)
AC
RVLV
Right Valve (Not Used)
AC
Pan
Pan Heater (Not Used)
AC
Comp
Compressor
AC
F1
Evaporator Fan
DC
F2
Evaporator Fan (Not Used)
DC
F3
Condenser Fan
DC
L1
Cabinet Lighting
DC
L2
Cabinet Lighting (Not Used)
DC
Up
Select
Down
RETURN TO MENU
RELAY TOGGLE
MULL OFF
COND OFF
ID
Description
States
Door
Door Switch
Open - Closed
IN2
Input 2 - Not Used
Open
Test Input
Factory Test Input
Open
USB
USB Connection State
Flash - Com Port
ID
Description
States
Evap Fan
Evaporator Fan
0 - 100%
Condenser Fan Condenser Fan
0 - 100%
Light
Interior Lighting
Off - Low - Med - High
Up
Select
Down
RETURN TO MENU
INPUT STATUS
DOOR OPEN
IN2 OPEN
Up
Select
Down
RETURN TO MENU
OUTPUTS
EVAP FAN=0%
CONDENSER FAN=0%
