LISA-C2 series and FW75-C200 - System Integration Manual
UBX-13000620 - R21
Early Production Information
Revision history
Page 102 of 103
Revision history
Revision
Date
Name
Status / Comments
-
24-Nov-2011
rcam
Initial Release
1
23-May-2012
smoi
Updated product names
2
9-Jul-2012
smoi
Unification of SIM nomenclature
3
20-Aug-2012
smoi
Document status change
A
12-Dec-2012
smoi
Added section 3.4 (OMA device management) and 4 (Handling and soldering)
A1
08-Jan-2013
rcam
Added LISA-C200 related sections 1.8 (Audio Interface), 2.3.2 (Footprint and past mask) and
3.4 (FTP)
A2
25-Feb-2013
rcam
C200-x2S-01 version introduction
A3
30-May-2013
rcam
OMA-DM guideline and best practice added
References to Aeris carrier added
B
03-Jul-2013
rcam
FW75- product introduction; New features added: GNSS integration and SIM (R-UIM) support
UART application circuit section updated: Recommended pin status during module power-
down, reset and power-on sequence; Interface with a 2.8V host processor
LISA-C200/FW75-C200 USB VID and PID corrected
Last revision with document number CDMA-2X-11004
R10
31-Jan-2014
rcam
Added precautions to avoid voltage back-feeding to digital interfaces
Power-on/off and reset recommended sequences added; +UTEST added
R11
25-Feb-2014
clee
Removed info in section 1.6.1.2 about PWR_ON pin not tolerable to battery voltage
Added Power-on sequence using VCC method added (section 1.6.4.2)
R12
05-Mar-2014
sses/clee
Changed Digital (PCM) Audio interface section to clarify I2S interface supports PCM data
format; Added Appendix B: Migration from LISA-U to LISA-C200; Added 2.4.3 Antenna
detection functionality; Added details on RI behavior difference during data session, between
LISA-C200 and GSM/UMTS modules such as LISA-U, SARA, and LEON
R13
26-Jun-2014
pafe
Removed references to FW75-D200
R14
02-Sep-2014
clee
Added power-on precautions to section 1.6.4.1 and 1.6.4.3, by checking
VCC
and
V_INT
pin
voltage is 0V before applying VCC.
Added suggested ESD high pass filter protection circuit regarding ANT pin for any need of
higher ESD protection (section 2.5.3)
R15
02-Oct-2014
clee
Added 04S/24S features: FOAT for Verizon; Network Indicator Status; CellLocate
TM
;
Audio Playback; US Cellular support for both (23S and 24S)
R16
06-Feb-2015
clee
Added LISA-C210: Document status changed to Objective Specification
R17
14-Nov-2015
clee
Updated recommended Power-on, Power-off and Reset procedures in section 1.6.4
Updated UART / USB and power saving sections 1.9.2.2 / 1.9.3.1
Added 3.5.1 Factory NAM settings
Document status changed to Production Information
R18
10-Feb-2016
clee
Updated the recommended voltage translator for I2C-bus signals.
Added more details on Migration from LISA-U to LISA-C200
R19
11-May-2016
clee/pafe
Added 1.5.2.1 Handing sudden momentary power loss
Improved details on not permitting RESET_N being driven high externally.
R20
26-Sept-2016
clee
Added 1.6.5 Key points to system functions
Updated Power-on, Power-off and Reset procedures in section 1.6.4
R21
08-Aug-2017
smoi
LISA-C210 removed
