TYROLIT
Hydrostress AG
Page 28
WSE1621 Control unit
Selecting the machine system
The machine system is detected automatically during the startup process.
Detecting the machine system
1 Wall sawing system
M
Cutting tool drive motor
2 Wire sawing system
M v
Feed motor
3 Core drilling system
Water
4 Hand saw
Selecting the mains power supply
The WSE1621 Control unit is preset for a 32 A mains power supply. (32A appears on the dis-
play). The mains power supply can be switched to a 16 A setting or an emergency power sup-
ply mode (G32A / G16A). The control unit will automatically return to the 32 A setting when it is
restarted.
To switch the control unit to the 16 A setting or emergency power supply mode (G32A / G16A),
perform the startup procedure as far as the point designated
“Press the black locking button
(2) on the radio remote controller”
.
Instead of using the pulse button (13), you can now use the locking button (2) to switch to the
16 A mains power supply or the emergency power supply mode (G32A / G16A).
(16A or emergency power supply (G32A / G16A) appears on the display.)
Selecting the mains power supply
3.5
3.6
