TYROLIT
Hydrostress AG
Page 30
WSE1621 Control unit
Selecting the tool station
The machine systems (wall saws, wire saws, core drilling) are detected automatically during the
startup process.
When the 1621 control unit has been started correctly, the tool stations can be selected before
switching on the main motor.
Selecting the tool station
A selection can be made between the following cutting tools:
Tool selection
Wall saws
TYROLIT diamond tool
(Ø650mm / Ø825mm / Ø1025mm / Ø1200mm / Ø1600mm)
Wall saws
TYROLIT high-speed diamond tool
Ø825mm / Ø1025mm / Ø1200mm / Ø1600mm
Wire saws
Diamond tool speed
0-26 m/s 0-22 m/s 0-17 m/s
Core drilling
Ø diamond tool
Ø150mm / Ø200mm / Ø250mm / Ø300mm / Ø350mm
Ø400mm / Ø450mm / Ø500mm / Ø600mm / Ø700mm
Ø800mm / Ø900mm / Ø1000mm
Proceed as follows:
X
Press the tool selection button (5). Toggle between the individual dimensions and speed
ratings by repeatedly pressing the tool selection button.
To switch to the high-speed diamond tool:
X
To activate the change, press the tool selection button (5) for 3 seconds.
When the button is released, the displayed symbol will change.
X
Pressing the tool selection button (5) for 3 seconds again and then releasing it will result in
the WSE1621 Control unit reverting back to the standard tools.
3.8
