TYROLIT
Hydrostress AG
Page 35
WSE1621 Control unit
Switching off the WSE1621 Control unit
Switching off the control unit
Proceed as follows:
X
Switch off the electric motor, switch (9) Main motor On/Off.
X
Deactivate the cooling water, switch (10) Water On/Off.
X
Close the water valve on the WSE1621 Control unit.
X
Turn the start switch (14) on the remote controller to the 0 position.
X
Switch off the WSE1621 Control unit by using the main switch (22).
CAUTION
Risk of frost damage to the WSE1621 Control unit!
X
If there is a risk of frost, blow out any water
Only use the EMERGENCY STOP function in an emergency to stop the WSE1621 Wall saw.
3.13