background image

 

20

WARRANTY 
 
For a period of one (1) year from the original date of purchase, if the product is 
determined to be defective, we  will repair or replace the product, at its option, at 
no charge to the customer, or pay the associated repair costs to an authorized 
service facility. All replacement parts, new or rebuilt, supplied at our option for 
repairs will be warranted for the remainder of the original warranty period of one 
(1) year. All defective products or components replaced under this limited 
warranty will become our property. This limited warranty excludes all components 
not manufactured by OUR COMPANY, which are listed below with their 
corresponding independent warranty periods. Such components are warranted 
by their respective manufacturer, whose warranty will be the governing warranty 
for that particular product. 
 
 

Excluded Components 

Manufacturer’s Warranty 

Electric Motors 

1 Year 

 

 

 
 
 
EXCLUSIONS FROM WARRANTY 
 
We cannot assume responsibility for claims arising from abuse of the our 
product: 
 

  Due to abuse by the Purchaser in their processing.  

  Due to improper installation practices or procedures.  

  Due to abuse or improper usage by the end-user.  

  Due to contaminants, including, but not limited to, exposure to salt or fresh 

water, chemicals and any other form of contamination from a source outside 
of our control. 

 
 
LIMITED WARRANT 
 
This product is covered by a one year warranty from the date of purchase. If the 
product is defective in workmanship or material, TYROLIT Hydrostress AG will 
repair and /or replace it free of charge upon returning the product to 
distributor/dealer in its original packaging.  
This warranty does not cover normal wear or damage resulting from operator 
abuse. TYROLIT Hydrostress AG obligations under this warranty shall be limited 
to the repair and/or replacement of the product. TYROLIT Hydrostress AG shall 
not be liable for consequential damages resulting from the improper use of the 
product. This warranty is void if the product or any of its components are 
modified, altered, or in any way changed. Selected components such as 
motor/engines are excluded from this warranty and are subject to the 
manufacturer’s warranty. This warranty is in lieu of all warranties expressed or 
implied. 

Содержание TBE350 Series




























Отзывы: