TYM T1054, Руководство оператора

Страница: 83 / 204

2 -
2
DESCRIPTION OF OPERATION SYSTEM
Draft control lever
< SC MODEL >
IMPlEMENT lIFTINg CON-
TROl SYSTEM
(1) Position lever
This lever is used to lift and lower
an implement to a certain working
height freely and maintain it.
►
Position
lever
J10O363A
< Operation >
<Lifting> - Pull the lever back to
lift the implement.
<Lowering> - Push the lever for-
ward to lower the implement.
Stopper bolt - It is used to fix the
lever into the desired position to
maintain a constant working po-
sition (Depth).
•
•
•
(2) Draft control lever
This lever is used to protect an im-
plement and ensure safe opera-
tion when using a draft implement,
such as a plow, by attaching it to the
3-point link.
When leaving the tractor, make
sure to lower the implement and
stop the engine.
Others may operate one of the
controls, leading to a dangerous
situation.
•
•
WARNING
< Operating principle >
If draft resistance is excessive during
draft work, such as plowing, the engine
may be stopped or the implement can
be damaged. To prevent this, the im-
plement is automatically lifted to pro-
tect devices and implement when the
draft resistance reaches the preset
load level.
< Operation >
The amount of load applied to an im-
plement is determined by the position
of the lever.
It is possible to select the desired
amount of load in the range from the
lowest position (1) up to the highest po-
sition (4). Higher position means lower
load amount.
In other words, the higher the lever is
positioned, the less draft load an imple-
ment is instantly lifted with. Likewise,
the lower the lever is positioned, the
higher draft load an implement is lifted
with.