TYM T1054 Скачать руководство пользователя страница 2

Страница: 2 / 204

The following warning signs in this manual draw additional attention to items of importance for the safe and

correct operation of the tractor.

WARNING SIGNS IN THIS MANUAL

DANGER

This indicates that a condition may result in harm, serious injury or death to you or oth-

er persons if the warning is not heeded. Follow the advice provided with the warning.

WARNING

Hazard or unsafe practice that can lead to severe injury or death.

CAUTION

Hazard or unsafe practice that can lead in injury or death.

IMPORTANT

Instructions for the correct operation of the machine which, if followed, will ensure

that it performs at it’s best.

All information, illustrations and specifications in this manual are based on latest information available at the

time of publication. The right is reserved to make changes at any time without notice.

MEANING OF THE SIGN

SIGN

Содержание T1054













































































































































































































Результаты поиска

Содержание T1054

Отзывы:

Бренды по названию

Популярные бренды

TYM T1054, Руководство оператора

Результаты поиска

Содержание T1054

Отзывы:

Бренды по названию

Популярные бренды