TYM T1054, Руководство оператора

Страница: 181 / 204

8
- 7
SAfETy STANDARD fOR AGRIcULTURAL wORk
PTO management
- Stop PTO before stopping the engine.
- Do not remove the PTO protective cover or imple -
ment protective panel for operating machine.
- Do not use PTO adaptor in order to extend the PTO
coupler or universal joint to outside of the PTO pro -
tective cover.
To repair, secure the wheel width, or change the
wheel under either tractor or trailer, with the trac -
tor or trailer raised, choke the wheels that are on the
ground.
Do not use a hydraulic jack for operating machine or
tractor. Instead, use a block or stand.
Safety frame
- Do neither weld nor drill a hole on the attached safe -
ty frame. Also do not modify it.
- Replace the damaged safety frame with a new one.
- If the safety frame was removed for specialized
work, restore it immediately.
•
•
•
•
Be careful to touch dangerous area such as power
transmission gear, rotating unit, etc. Put on a protec-
tive cover.
Do neither modify nor remove the safety device.
When checking and replacing the blade to plow the
ground
- Stop the engine.
- Prevent the rotary from falling by turning the fall ad -
justing handle to stop hydraulic pressure.
- Apply the parking brake.
- Do not stand between the tractor and rotary.
When working with rotary
- Do not put your hands near the rotating part such as
blade axle and universal joint.
- Do not ride on the rotary.
- When driving backward or turning quickly with the
rotary raised up, make sure to check behind the ma -
chine.
- Adjust the rear cover.
•
•
•
•
7. TRAcTOR