TYM T1054, Руководство оператора

Страница: 157 / 204

5 - 5
5
MAINTENANCE
J10O528A
ErrOr COdE dIsplAy fOr
hydrAulIC sysTEM
If an error is occurred in the hydrau-
lic lifting/lowering system:
① The type of the error is displayed
by blinking of the status LED on
the control panel.
②
The error code is displayed
through the indicator on the me-
ter panel simultaneously.
►
ErrOr COdE dIsplAy Of
CONTrOl pANEl sTATus lEd
When there is an electric or elec-
tronic fault, the indicator (1) blinks
according to the setting in the sys-
tem to inform the type of the fault.
To read the error code properly, ob-
serve the number and sequence of
blinking of the indicator (1) carefully.
Read an error code according to the
following steps:
Step 1: The LED on the control panel
stops for approx. 2 seconds
before indicating a code.
►
Step 2: After a brief stop, it blinks for
the number of the first dig-
it of the error code at a short
interval.
Step 3: After delivering the first digit,
it stops blinking for approx.
1 second.
Step 4: After a brief stop, it blinks for
the number of the second
digit of the error code at a
short interval.
The control panel LED displays one
error code with the highest priority
(severe fault) at one time.
To check for any other error codes,
this code with the highest priority
should be cleared. Then, the con-
trol panel LED displays another er-
ror code if there is any.
Status LED (indicator (1))
Errors, that prevents the lift con-
trols from operation, has the high-
est priority.
•
CAUTION