Tylo Prime 1313/C, Руководство пользователя

Страница: 17 / 20

17
Press to switch on or off the panel.
Note! Only the exterior and interior lighting functions without press on .
Left display indicates the amount of operating time remaining. Press to increase the
time and press to decrease the time. This is done with 5-minute intervals. Max
operating time is 60 minutes.
Right display refers to control of the set temperature and also indicates the actual
temperature inside infra cabin. At boot the desired flash temperature for about 5
minutes.
Time settings
Temperature settings
to increase the temperature
and press to decrease the temperature. This is done with 1-degree intervals. After
the desired temperature is set, the number of temperature will flash for about 3
seconds. After the numbers of the set temperature stop flashing, the number indicated
will show actual temperature inside infra cabin. Maximum set of temperature is
65
˚C/˚F refer to the switching of ˚C and ˚F.
˚C/150˚F.
Press to switch on and off the internal light.
Press to switch on and off the external light.
Press to switch on and off the bench heater.
To activate the color therapy system press . Upon turning the system on, the color
light system will go into an automatically cycling mode, changing color every 8
seconds:
Press 2x and the light system will glow GREEN. Press 3x - RED. Press 4x - BLUE.
Press 5x - YELLOW. Press 6x - TURQUOISE. Press 7x - VIOLET. Press 8x - the light
system will turn off. Color light system automatically goes off if power is turned off.
Press
Lighting
Infra bench heater
Light therapy system
Control panel
RED YELLOW GREEN
VIOLET BLUE TURQUOISE