PowerSeries Pro Installation Guide
under the responsibility of someone having mutual interest. The person of mutual
interest is not the alarm-installing company.
Note:
This does not apply to strip mall applications where each independent business
must have their own separate alarm system.
e.g.,1: A commercial partitioned system that has an office and a warehouse area in a
building where each area can be armed or disarmed independently. e.g.,2: A residential
system partitioned so that the garage area is armed separately from the house.
Each of the above examples is under the sole responsibility of a single owner. The bell
and DACT power supply must be in a protected area including partitioned systems. The
bell and DACT power supply must be located where it can be heard by the person or
persons responsible for maintaining the security system during the daily arming cycle.
Bell Location
The alarm sounding device (bell) shall be located where it can be heard by the person
operating the security system during the daily arming and disarming cycle.
Protection of the Control Unit
The local control unit and the local power supply must be protected in one of the
following ways:
l
The control unit and audible alarm device must be in a protected area which is
armed 24 hours a day.
l
Each partition must arm the area protecting the control unit and the audible alarm
device power supply. This may require duplicate protection armed by each par-
tition. Access to this protected area, without causing an alarm, will require that all
partitions be disarmed.
l
In all cases described above, the protected area for the control unit must be pro-
grammed as not-bypassable.
Casual Users
The installer should caution the user not to give system information (e.g., codes, bypass
methods, etc.) to casual users (e.g., service people) and to only give out One-Time Use
codes.
User Information
The installer should advise the user and note in the User’s Manual:
l
Service organization name and telephone number
l
The programmed exit and entry time
l
Instructions to test system weekly
l
Note that the installer code cannot arm or disarm the system
- 29 -
