4
Section 1: Introduction
The LE4000 is a cellular communicator that sends alarm system information to a Sur-Gard System I-IP, II, III, IV or 5 receiver
through an LTE or 3G wireless network. This cellular communicator can be used with UL/ULC Listed compatible control units, as
indicated in the manufacturer's installation instructions.
The performance of the LE4000 depends greatly on cellular network coverage. Therefore, it should not be mounted without first per-
forming placement tests to determine the best location for reception (minimum of one blue/green LED ON). Optional antenna kits –
LTE-8ANT (8ft/2.4m), LTE-15ANT (15ft/4.6m), LTE-25ANT (25ft/7.6m) and LTE-50ANT (50ft/15.2m) are available.
Note:
The LE4000 is designed to work with the Contact ID communication format as described in the SIA DC-05 standard, as well
as the SIA communications format as described in the SIA DC-03 standard. Before completing the field installation of the alarm mon-
itoring system please ensure communication with the supervising central station is successful by sending several events and getting
confirmation that they have been received.
1.1 Features
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Penta-Band
LTE;
Dual-band
UMTS
Radio
Advanced
Carrier
Selection
Cellular
Signal
Indicator
LTE
/3G
/
Internet
communication
with
Sur-Gard
SG-System
I-IP
/
II
/
III
/
IV
/
5
Compatible
with
4-digit
or
10-digit
Contact
ID
communication
format
as
described
in
SIA
DC-05
Standard
and
the
SIA
DC-
03
standard
for
300
baud.
Example
of
suitable
compatible
alarm
panels:
DSC
Models
HS2128, HS2064, HS2032, HS2016,
PC1864,
PC1832,
PC1616,
PC4020.
Panel
Transmission
Monitoring
for
up
to
four
phone
numbers
Simulates
landline
Switches
automatically
to
the
LTE
or
3G
network
in
the
event
of
landline
trouble
(e.g.,
line
down)
DLS
support
for
status,
firmware
updates
and
remote
debug
enable
Remote
Firmware
Upgrade
Remote
Diagnostics
Case
and
Wall
Tamper
Panel
Format
Detection
Programmable
Input
Programmable
Output
1.2 Technical Specifications
The input voltage to the LE4000 can be drawn from the UL/ULC Listed control panel or provided by an external UL/ULC Listed
power supply (with battery back-up) rated for the application (external power-limited source).
Power Supply Rating
Input Voltage Class:
Class 2, power limited
Compatible External Power Adapters (2-prong):
DSC
ADP1310
(W)
-NAU
(US)
/
ADP1310
(W)
-NA
(Canada)
NOTE:
For
UL/ULC
listed
installations,
the
input
rating
for
the
external
power
adapter
is
120V
AC
/60Hz/0.4A.
Input Voltage (Nominal):
13.8V
DC
required
Input Current:
700mA
LE4000 Installation Manual
