TYAN TITAN TURBO ATX-2, Руководство пользователя

Страница: 50 / 71

50
Integrated Peripherals
IDE HDD Block Mode
The terms “multiple commands,” “multiple sector read/write,” and
“block transfer” are all alternate names for block mode. Unless your
IDE hard drive is old, it should support Block Mode. If Enabled, Block
Mode yields automatic detection of the optimal number of block read/
writes per sector that the drive can support.
IDE Primary Master PIO, IDE Primary Slave PIO, IDE Second-
ary Master PIO,
and IDE Secondary Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO
mode (from 0 to 4) for each of the four IDE devices supported by the
onboard IDE interface. Modes 0 through 4 provide successively
increasing performance. In Auto mode, the system automatically
determines the best mode for each device.
ROM PCI/ISA BIOS (2A59IT5A)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
IDE HDD Block Mode : Disabled Parallel Port Mode : ECP+EPP
IDE Primary Master PIO : Auto ECP Mode Use DMA : 3
IDE Primary Slave PIO : Auto Parallel Port EPP Type : EPP1.7
IDE Secondary Master PIO : Auto
IDE Secondary Slave PIO : Auto
IDE Primary Master UDMA : Disabled
IDE Primary Slave UDMA : Disabled
IDE Secondary Master UDMA : Disabled
IDE Secondary Slave UDMA : Disabled
On-Chip Primary PCI IDE
: Enabled
On-Chip Secondary PCI IDE : Enabled
USB Keyboard Support : Disabled
On-board FDC Controller : Enabled
On-board UART 1 : Com1/3F8
On-board UART 2 : Com2/2F8
On-board UART 2 Mode : Standard
On-board Parallel Port : 378/IRQ7
Chapter 4
(non-default settings)
ESC : Quit
è ç êé
:Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults