TYAN TITAN TURBO ATX-2, Руководство пользователя

Страница: 42 / 71

42
Power Management Setup
Power Management
This option allows you to select the level of power saving for the Doze,
Standby, and Suspend modes. Max Saving provides the most power
saved; Min Saving the least. User Define allows you to set each of the
modes individually.
PM Control by APM
If APM is installed on your system, selecting Yes gives better power
savings. This board supports APM.
Video Off Method
The Blank Screen option will let the system BIOS blank the screen
when disabling video. V/H SYNC+Blank will let the BIOS turn off the
V-SYNC and H-SYNC signals running from the VGA card to the
monitor.
ROM PCI/ISA BIOS (2A59IT5A)
POWER MANGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management : Disabled **Reload Global Timer Events**
PM Control By APM : No IRQ [3-7, 9-15],NMI : Disabled
Video Off Method : V/H SYNC+Blank Primary IDE 0 : Disabled
Video Off After : Standby Primary IDE 1 : Disabled
MODEM Use IRQ : 3 Secondary IDE 0 : Disabled
Doze Mode : Disabled Secondary IDE 1 : Disabled
Standby Mode : Disabled Floppy Disk : Disabled
Suspend Mode : Disabled Serial Port : Enabled
HDD Power Down : Disabled Parallel Port : Disabled
Throttle Duty Cycle : 62.5% Power Interruption : Disabled
ZZ Active in Suspend : Disabled
VGA Active Monitor : Enabled
Soft-Off by PWR-BTTN : Delay 4 sec.
CPUFAN Off In Suspend : Enabled
Resume by Ring : Disabled
IRQ 8 Break Suspend : Disabled
Chapter 4
ESC : Quit
è ç êé
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values
(Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults