TYAN TITAN TURBO ATX-2, Руководство пользователя

Страница: 35 / 71

35
CPU Internal Cache and External Cache
These two fields-when enabled-result in faster memory access.
Quick Power On Self Test
Select Enabled to reduce the amount of time required to run the Power
On Self Test (POST). It should be noted that the quick test skips
certain steps that are covered in the normal POST.
Boot Sequence
This category determines which drive the computer searches first for
the disk operating system.
Swap Floppy Drive
If you have two floppy drives, you can choose to designate the physical
A drive as the logical B drive, and vice-versa. If this function is En-
abled, the two will be swapped. If Disabled, the two will be defined
normally (i.e. physical and logical designation will be the same).
Boot Up Floppy Seek
During POST, the BIOS will determine if the floppy disk drive installed
is 40 or 80 tracks. The 360KB type is 40 tracks while the 720KB,
1.2MB, and 1.44MB are all 80 tracks.
Boot Up NumLock Status
Determines whether or not NumLock is active when the system boots.
If On, the number keys are active on the keypad; if Off, the arrow
keys are active.
BIOS
A, C System will first search for floppy disk drive, then hard disk drive.
C, A System will first search for hard disk drive, then floppy disk drive.
Enabled
BIOS searches for floppy disk drive to determine if it
is 40 or 80 tracks. Note that the BIOS cannot
distinguish between 720KB, 1.2MB, and 1.44MB
drive types, as they are all 80 tracks.
Disabled
BIOS will not search for the type of floppy disk drive
by track number. Note that there will not be any
warning messages if the drive installed is 360KB.