TYAN TITAN TURBO ATX-2, Руководство пользователя

Страница: 32 / 71

32
Video
This category detects the type of graphics adapter used for the primary
display system. The value entered in this field must match your video
display card and monitor. You may not need to alter the default value,
as BIOS usually detects the correct video type automatically.
Halt On
The category determines whether the computer will stop if an error is
detected during power up.
Memory
You cannot alter this category from within Setup: it is for display only
and is determined by the BIOS POST (Power On Self Test). The three
categories are as follows:
Base Memory
The BIOS POST will determine the amount of base
(or conventional) memory installed in the system. The
Chapter 4
EGA/VGA
Enhanced Graphics Adapter/Video Graphics Array. For
EGA, VGA, SEGA, SVGA, or PGA monitor adapters.
CGA 40 Color Graphics Adapter, power up in 40 column mode.
CGA 80 Color Graphics Adapter, power up in 80 column mode.
Mono Monochrome adapter, including hi-res monochrome.
No errors
The system boot will not be stopped for any errors
that are detected.
All errors
If the BIOS has detected a non-fatal error, the system
will be stopped and you will be prompted.
All, but Keyboard
The system boot will not stop for a keyboard error,
but will stop for all other errors.
All, but Diskette
The system boot will not stop for disk errors, but will
stop for all other errors.
All, but Disk/Key
The system boot will not stop for a keyboard or disk
error, but will stop for all other errors.