TYAN THUNDER I7522, Руководство пользователя

Страница: 11 / 61

Thunder i75 2 2 S5362 Chapter 1: Introduction
http://www. tyan.com
8
1.6 – i7522 S5362 Jumper Settings Quick Refer ence
Jumper Function Settings
JP1 CMOS Clear
(Refer to
Section 3. 1.2 )
1-2: Clear CMOS
2-3: Normal
JP2 Onboard VGA
(Refer to
Section 3. 1.3 )
Open: Enable ATI VGA
Close: Disable ATI VGA
JP5 Watch- Dog Timer
(Refer to
Section 3. 1.4 )
1-2: Watchdog Timer (WDT) resets system
2-3: WDT generates NMI
JP7 PCIX1 Channel B (for PCIX1 -
S1 and PCIX1-S2 slots) Open: Enable 133 MHz maximum frequency
Close: Disable 133 MHz and up to 100/66 MHz
Refer to
Section 3. 1.5
JP8 PCIX2 Channel A (for PCIX2 -
P1 slot) Open: Enable 133 MHz maximum frequency
Close: Disable 133 MHz and up to 100/66 MHz
Refer to
Section 3. 1.7
JP9 PCIX2 Channel B (for PCIX2 -
S1 slot) Open: Enable 133 MHz maximum frequency
Close: Disable 133 MHz and up to 100/66 MHz
Refer to
Section 3. 1.8
SPK Buzzer/External Speaker 1-4: For external speaker connector
3-4: Enable onboard buzzer
Refer to Section 3. 1.9
CPU
FAN1 CPU1 Fan Connector
Refer to Section 3.1.15
CPU
FAN2 CPU2 Fan Connector
Refer to Section 3.1.15
FAN1 4-pin System Fan Connector Refer to Section 3.1.15
FAN 2 ~
FAN7 3-pin System Fan Connectors
Refer to Section 3.1.15
J9 External HDD LED Input
Header Refer to Section 3.1.10
J3 4 SMDC Connector Refer to Section 3.1.11
J35, J36 LAN1 LED Header s Refer to Section 3.1.13
J37, J38 LAN2 LED Header s Ref er to Section 3.1.14
USB2 USB Header Refer to Section 3.1.12
USB3 USB vertical connector Refer to Section 3.1.12
USB4 USB vertical connector Refer to Section 3.1.12
P-SATA/
S-S A T A SATA Connectors
Refer to Section 3.1.16
TYFP (Front Panel Connector )
Signal
Pin Pin
Signal
HD LED +
1 2
PWR LED +
HD LED -
3 4
GND
GND
5 6
PWR_ON-
Reset Button -
7 8
GND
+5V
9 10
Warning LED+
NC
11 12
GND
3Vsb
13 14
KEY
SMB DATA
15 16
GND
SMB CLK
17 18
Chassis Intrusion-