TYAN B5121G14S2, Руководство пользователя

Страница: 33 / 63

33
http://www.TYAN.com
3.1 Installation Instructions for Windows
Windows Installation Notes
Proceed with the normal Windows operating system installation but if you are installing
Windows on to a Serial ATA hard disk drive with RAID function, do the following first:
1. Create a RAID driver floppy disk by inserting a blank floppy disk and the driver CD
into the floppy drive and CD drive respectively, on another Windows system.
2. Run the
F6flpy32.exe
or
F6flpy64.exe
program in the
\Drivers\
SATA_RAID\F6flpy\ directory. This will create the RAID driver floppy disk.
F6flpy32.exe
is the driver for 32-bit Windows OS
F6flpy64.exe
is the driver for 64-bit Windows OS
3. On your system, enter BIOS Setup and enable the RAID and SATA functions (see
chapter 5 for details).
4. Connect a USB floppy drive to your system.
5. Press
F6
and insert the floppy disk containing the Intel RAID driver into the USB
floppy drive.
6. Specify the “Intel® 82801FR SATA RAID Controller, (Desktop ICH6R)” to install.
7. Then, proceed with the Windows operating system installation.
NOTE:
After installing the Windows operating system, install the Service Pack. Then
proceed to the following driver installations
.
Chipset Driver
1. Insert the driver CD into the CD drive.
2. Run the
infinst_auto.exe
program in the
\Drivers\Intel ICH6R
Chipset\
directory.
3. Follow the onscreen instructions to complete the installation.
4. When finished installing, choose the “Yes” option to reboot and click “Finish” to
restart your system. The driver should now be loaded.