TYAN B5121G14S2, Руководство пользователя

Страница: 19 / 63

19
http://www.TYAN.com
Installing a Hard Disk Drive
NOTE: Make sure that the jumper setting of the hard disk drive is set to “Master.” (See the
hard disk drive’s documentation for information.)
WARNING:
Please attach the hard bracket to the chassis to prevent enlarging the screw
holes even if you will not use hard disk drive
It is advised that you select a hard disk drive that meets the following specifications. A
hard disk drive that does not meet these specifications can cause reliability problems in
your system.
z
Peak current draw: must not exceed 1.8 amperes maximum (at 5 volts) and 0.7
amperes maximum (at 12 volts)
z
Rotational speed: 5400/7200 rpm
z
Interface: Serial ATA
z
Operating temperature: must be able to operate in environments up to 55
°
C
z
Operating humidity: 10 % to 90 % (non-condensing)
z
IDE and SATA hard disk drives cannot be used in combination for RAID function
1. Remove the cabinet cover (see previous section).