TYAN B5121G14S2, Руководство пользователя

Страница: 20 / 63

20
http://www.TYAN.com
2. Locate the bracket for the primary hard disk drive, next to the power supply.
Remove the screw and slide the bracket off the metal tabs to detach it.
3. Secure the hard disk drive to the bracket with four bottom screws.
4. Fit the bracket with the hard disk drive back into place and secure with one screw.
5. Connect one end of the included Serial ATA data cable to the primary Serial ATA
connector (
n
) , connect the other end to the rear of hard disk drive 2 (
o
) (see
chapter 5 for adding a second hard disk drive), and insert the data cable into the wire
clip (
p
) . Connect the single end of the included power Y-cable to the power