35
Gearbox Capacity:
0.7 Litre SAE75W90 Fully Synthetic
which meets the following minimum requirements;
Viscosity at 40°C, cSt, 100.0 min.
Viscosity at 100°C, cSt, 17.2 min.
Gearbox Capacity
0.6 Litre SAE75W90 Fully Synthetic
which meets the following minimum requirements;
Viscosity at 40°C, cSt, 100.0 min.
Viscosity at 100°C, cSt, 17.2 min.
Gearbox Capacity:
0.7 Litre SAE75W90
Fully Synthetic which meets the following minimum requirements;
Viscosity at 40°C, cSt, 100.0 min.
Viscosity at 100°C, cSt, 17.2 min.
Drainage of the gearbox for an
oil change is via the drain plug
located on the base of the
gearbox.
To refill or for ‘topping up’
remove filler and level plugs
indicated opposite and fill
gearbox via the filler plug to a
point where the oil starts to
run from the level plug orifice.
Replace both plugs and
tighten.
Содержание TF5500
