Twose TF5500, Руководство по эксплуатации

Страница: 33 / 52

24
Slew Control & Slew –Tele Swap
The default controls for Slew operation are buttons #7 & 8 on the control panel. The unit
features a built in Slew - Tele swap function which is activated by pressing button #9 on
the control panel for 1 second; in ‘swap mode’ Slew operation is then controlled using the
buttons on the joystick and Tele operation using the buttons #7 & 8 on the control panel.
Press button #9 again for 1 second to return the controls to the default setting.
Lift Float Activation & Adjustment
Press button #5 on the control panel to switch on the
lift float function.
With lift float ON ; float pressure can be decreased or
increased via buttons #7 & 8 on the control panel.
Button #7 decreases lift pressure.
Button #8 increases lift pressure.
The pressure adjustment setting will
remain in the systems memory until
the unit is next powered off or until
subsequent adjustment.
Angle Float Activation
Press button #4 on the control panel
to switch ON the angle float
function.
Pressing button
#4 again will switch
the function OFF.
Master Reset (Return to Default Settings)
To return controls to default factory settings;
press and hold buttons #9 & #3 for 3 seconds.