Twose TF5500, Руководство по эксплуатации

Страница: 2 / 52

IMPORTANT
VERIFICATION OF WARRANTY REGISTRATION
DEALER WARRANTY INFORMATION & REGISTRATION VERIFICATION
It is imperative that the selling dealer registers this machine with McConnel Limited before
delivery to the end user
– failure to do so may affect the validity of the machine warranty.
To register machines go to the McConnel Limited web site at www.mcconnel.com , log
on
to ‘
Dealer Inside
’ and select the ‘
Machine Registration button
’
which can be found in
the Service Section of the site. Confirm to the customer that the machine has been
registered in the section below.
Should you experience any problems registering a machine in this manner please contact
the McConnel Service Department on 01584 875848.
Registration Verification
Dealer Name:
……………………..…………………………………………………………….
Dealer Address:
…….………………………………………………………………………….
Customer Name:
……………………..…………………………………………………………
Date of Warranty Registration:
……/……/...…… Dealer Signature: ………………..……
NOTE TO CUSTOMER / OWNER
Please ensure that the above section above has been completed and signed by the selling
dealer to verify that your machine has been registered with McConnel Limited.
IMPORTANT: During the initial ‘bedding in’ period of a new machine it is the customer’s responsibility
to regularly inspect all nuts, bolts and hose connections for tightness and re-tighten if required. New
hydraulic connections occasionally weep small amounts of oil as the seals and joints settle in – where
this occurs it can be cured by re-tightening the connection – refer to torque settings chart below. The
tasks stated above should be performed on an hourly basis during the first day of work and at least
daily thereafter as part of the machines general maintenance procedure.
CAUTION: DO NOT OVER TORQUE HYDRAULIC FITTINGS AND HOSES
TORQUE SETTINGS FOR HYDRAULIC FITTINGS
HYDRAULIC HOSE ENDS PORT ADAPTORS WITH BONDED SEALS
BSP Setting Metric BSP Setting Metric
1/4”
18 Nm 19 mm
1/4”
34 Nm 19 mm
3/8”
31 Nm 22 mm
3/8”
47 Nm 22 mm
1/2”
49 Nm 27 mm
1/2”
102 Nm 27 mm
5/8”
60 Nm 30 mm
5/8”
122 Nm 30 mm
3/4”
80 Nm 32 mm
3/4”
149 Nm 32 mm
1”
125 Nm 41 mm
1”
203 Nm 41 mm
1.1/4”
190 Nm 50 mm
1.1/4”
305 Nm 50 mm
1.1/2”
250 Nm 55 mm
1.1/2”
305 Nm 55 mm
2”
420 Nm 70 mm
2”
400 Nm 70 mm