TVS Apache RR 310 Скачать руководство пользователя страница 58

Страница: 58 / 200

Please ensure that the fuel bar indication in cluster is

greater than 1 bar always. It is unsafe to ride with 1 bar

or less.

Incase of any error in input system, all the bars of fuel

level indicator flashes and low fuel warning indicator

turns ON. Contact nearest TVS Motor Company

Authorised Main Dealer incase any of these problems

are noticed.

Note

If the vehicle runs with very less fuel it will result in

improper engine operation or shutdown due to lack of

fuel which may result in accident.

Warning

Do not run the fuel tank dry to avoid failure of fuel pump

and other consequential damages if any.

Caution

e4. Low fuel warning indicator

• Low fuel warning indicator (f4) is a safety

indicator to caution you to fill the petrol as soon

as possible. Minimum 2.2 liters of petrol will be

available in the tank when this indicator comes

glows.

When the low fuel warning indicator glows fill fuel

immediately to avoid engine OFF / Damage to fuel pump

which leads to replacement of pump without warranty.

Caution

Содержание Apache RR 310









































































































































































































Результаты поиска

Содержание Apache RR 310

Отзывы:

TVS Apache RR 310, Руководство пользователя, Страница: 58 / 200

Результаты поиска

Содержание Apache RR 310

Отзывы: