TVS Apache RR 310 Скачать руководство пользователя страница 34

Страница: 34 / 200

Apply the clutch when starting the vehicle with gear

engaged.

Increase in engine rpm during acceleration, without

increase in road speed indicates the clutch slip. A

slipping clutch causes high fuel consumption and engine

overheating. Refer page 130 for clutch adjustment

procedure.

Note

Proper usage of clutch increases the life of engine

component and prevent any damage to the transmission

components of engine.

Caution

Clutch Lever (ref. Fig. 08)

Clutch lever (A) is located in the handle bar at LH side.
• Clutch lever is used to disengage clutch.
- When the clutch is pressed, drive from the

engine to the gearbox and the rear wheel is

disengaged.

- Proper use of clutch lever is essential in all riding

situations, especially while moving the vehicle

from rest.

Fig. 08

Содержание Apache RR 310









































































































































































































Результаты поиска

Содержание Apache RR 310

Отзывы:

TVS Apache RR 310, Руководство пользователя, Страница: 34 / 200

Результаты поиска

Содержание Apache RR 310

Отзывы: