TVS Apache RR 310 Скачать руководство пользователя страница 109

Страница: 109 / 200

Do not smoke while refueling. Do not use cell phones

while refueling. Avoid spilling of fuel on hot engine.

Refill petrol in well ventilated area. Switch OFF the

engine and ignition key while refueling as petrol is highly

inflammable. Be sure there is no fuel trapped in the filler

recess. To avoid evaporation of petrol and deterioration

of paint gloss due to ultra violet rays and heat of sunlight,

always park your motorcycle in a covered parking.

Warning

Check for abnormal jerk / noise while opening the

cap / leak. If found any, contact TVS Motor Company

Authorised Main Dealer.

Caution

After ignition ON, the instrument cluster checks for

multiple parameters. Side stand status is one of such

parameters. If the side stand is engaged, then the fuel

level indication indicates the previously stored value.

Once the side stand is dis-engaged, the fuel level display

gets updated if there is any change in the volume.

Always make sure to close the cap properly after every

refilling to avoid leak / evaporation.

Note

Содержание Apache RR 310









































































































































































































Результаты поиска

Содержание Apache RR 310

Отзывы:

TVS Apache RR 310, Руководство пользователя, Страница: 109 / 200

Результаты поиска

Содержание Apache RR 310

Отзывы: