TVS Apache RR 310 Скачать руководство пользователя страница 176

Страница: 176 / 200

163

Rear wheel stand

Use the rear wheel stand (the rear wheel stand is

an accessory and it is available with the TVS Motor

Company Authorised Main Dealer).
• Ensure that the motorcycle is parked on a flat and

firm surface.

• Loosen the clamping screws (1) of the stand

adopters.

• Move away the adopters (2 & 3) in such way that

the swing arm fits between them (ref. Fig. 83).

• Ensure that the axle is not covered.
• Position the stand (ref. Fig. 84).

• Make sure that the vehicle is secured so that it

cannot topple sideways.

• Push the stand down until the motorcycle is

standing upright and the handle of auxiliary stand

is resting on the floor properly.

When raising the motorcycle, make sure that the vehicle

is secured so that it cannot topple sideways.

Caution

Fig. 83

Fig. 84

Содержание Apache RR 310









































































































































































































Результаты поиска

Содержание Apache RR 310

Отзывы:

TVS Apache RR 310, Руководство пользователя, Страница: 176 / 200

Результаты поиска

Содержание Apache RR 310

Отзывы: