TVS Apache RR 310 Скачать руководство пользователя страница 106

Страница: 106 / 200

Cooling System (Radiator) (ref. Fig. 23)

A coolant is used in the motorcycle cools the hot

engine and ensures that operating the vehicle at

specified temperature which in-turn avoids the risk of

malfunctions.
• A radiator and cooling fan fitted in the cooling

system does job of cooling the coolant used in

the motorcycle by air stream.

• Dirty cooling foils of radiator reduces the cooling

effect. Do the visual check and ensure the cooling

foils of the radiator are not clogged with any

dirt or mud. If so contact TVS Motor Company

Authorised Main Dealer.

A coolant reservoir tank (A) is fitted on the right side

of the motorcycle below the side panels (ref. Fig. 24).

The cooling fan may switch ON approx 22 secs. after the

ignition is turned OFF to reduce the heat and to protect

the engine which is normal. Need not panic.

Note

Fig. 23

Fig. 24

Содержание Apache RR 310









































































































































































































Результаты поиска

Содержание Apache RR 310

Отзывы:

TVS Apache RR 310, Руководство пользователя, Страница: 106 / 200

Результаты поиска

Содержание Apache RR 310

Отзывы: