TVS Apache RR 310 Скачать руководство пользователя страница 156

Страница: 156 / 200

143

Ensure not to damage the brake caliper during wheel

removal.

Do not actuate the brake lever after the wheel is

removed. Unintentional press of brake lever leads to

brake pads binding.

Caution

• Place the front wheel down and roll it forward out

of front suspension. Ensure not to damage the

wheel speed sensor during the removal process.

• Take out the spacer bush (7) from the left side of

the wheel hub (ref. Fig. 63).

During the wheel removal, take additional care to prevent

the wheel rims from scratches.

Note

Reassembly

• Push the brake pads of front caliper away from

together to ease the front wheel entry in to front

suspension.

• Loosen the mounting screw (8) and take out the

speed sensor (9) from front suspension.

• Fix the spacer bush (7) on the left side of wheel

hub (ref. Fig. 63).

• With the care, roll the front wheel into the front

suspension so that there is no damage to the

wheel speed sensor.

• Lift the front wheel. While ensuring the proper

seating of brake disc into the caliper assembly,

insert the quick release axle.

• Remove the front wheel stand and stroke the

front fork several times without applying the

brake.

• Mount the front wheel stand again and install the

locking screw (3) with specified torque (ref. Fig.

61).

Fig. 63

Содержание Apache RR 310









































































































































































































Результаты поиска

Содержание Apache RR 310

Отзывы:

TVS Apache RR 310, Руководство пользователя, Страница: 156 / 200

Результаты поиска

Содержание Apache RR 310

Отзывы: