C2-3300 S
ERIES
O
PERATION
M
ANUAL
58
swapped at the end of the Take – so that another ‘Take’ will put them back to as
they were before. (Note that not all units support the CC-300.)
This screen is an informational screen showing the total number of the defined
resolutions in the resolution database. Future firmware releases may increase the
total number of resolutions defined in the database.
If your units supports Logos or Still Images / Testcards then this screen will display
how many are present in the memory of the units.
Power Cycles refers to how many times the unit has been powered since it left the
factory. This is an informational screen. No action is taken regardless of the value
shown here, however some users have an equipment cleaning or specification
audit procedure and this information may be useful to those users.
Indicates the total number of times the firmware has been changed over the life of
the unit. It is quite possible for this to be more than 1, as a unit undergoes
numerous tests during production.
This is another informational display for usage audit purposes.
Certain units have built-in temperature sensors, and if yours has such a feature
then the above menu item will appear. If the ambient temperature of the internal
components becomes excessively high or low, the unit will shut down to prevent
harm. This display shows the current value of the ambient temperature at four
locations within the case and can be an early predictor of a shutdown before the
shutdown actually occurs.
System
Resolutions 88
System
Power cycles 41
System
Firmware updates 11
System
Hours in Use 877
System
Logos / T-cards 1 / 4
System
Temp.C 30 33 43 45
