C2-2450A O
PERATION
M
ANUAL
99
Figure 27 Add resolution to table
Once your new resolution is added, you can program the resolution into the Scaler
using the
Communications
menu and then selecting
Program into unit
and then
selecting
Program Resolutions
. The application will proceed to program all the
resolutions on the list into the scaler.
Note that this will overwrite any resolutions currently in the scaler.
The second method of creating a resolution requires you to know all the detailed
timing parameters. The timings tab allows all the detailed video timing information
to be added and altered, including the title of the resolution entry (limited to 24
characters).
There are also along side the detailed timing parameters several flags that are used
to specify the signal type these are interlaced – for interlaced video signals, CCIR
for video that would normally be output on CV or YC connectors and RGB for video
that would be output on RGB or Component type connections.
