Turtle Tough TT-TOUGH-DO-M4M Скачать руководство пользователя страница 4

TURTLE

TOUGH

®

 

4

Qualification and Training of Personnel

The personnel employed for installation, operation, inspection, and maintenance, must be suitably qualified for 
this work. The areas of responsibility, competence and supervision of the personnel must be precisely defined by 
the owner. Personnel who do not have the required know-how must be trained and instructed. Also, the owner 
of the system must ensure that the relevant personnel are fully familiar with and have understood the contents of 
this manual. Should training be required please contact your Turtle Tough distributor.

Important Safety Instructions

When installing and using this electrical equipment, basic safety precautions should always be observed.

Danger

NOTICE

Read and follow all instructions. Save these instructions.

Warning

WARNING

To reduce the risk of injury, do not permit children to use this product.

Electric Shock Hazard

WARNING

Risk of electric shock. Connect only to a suitable isolated, hard-wired electrical outlet. 
It is recommended that the outlet is protected by an Residual Current Detector or is 
in any event in compliance with all local electrical regulations. Do not bury electrical 
supply cable.

Electric Shock Hazard

WARNING

To reduce the risk of electric shock, replace damaged electrical cable immediately.

Danger

Electric Shock Hazard

WARNING

To reduce the risk of electric shock, do not use an extension cable to connect the unit 
to an electric supply; provide a properly located outlet

 

Hazards due to Non-compliance

Failure to comply with the safety instructions may endanger not only people but also the environment and the system.
The following hazards, in particular, may arise:

• 

Failure of major system functions.

• 

Failure of specified methods for maintenance and repair.

• 

Danger to people due to electrical, mechanical and chemical effects.

Safe Operation

The safety instructions contained in this manual must be observed. 

 

The owner is responsible for ensuring compliance with local safety regulations.

Safety Instructions for the Owner/Operator

Danger due to electric current must be excluded. Refer to local electrical safety standards and regulations. 

Содержание TT-TOUGH-DO-M4M


















Отзывы: