Turnstiles TPW-321ASP, Руководство по эксплуатации

Страница: 6 / 22

4
time. The standard default is 5 seconds.
As to the read/write system such as magnetic card, bar code card and ID card are the same
as that given above, except that the determination of legal card and the barrier open signal
of turnstile main control board are carried out by the administrative computer.
4.2 Equipment Operation Mode
To facilitate the application of users, the equipment is set up with various operation modes
as given below for selection by the users in the practical application:
1) Double way reading card, double way flow limit
2) One way reading card, the other way barring
4.3 System Composition
The product can either be used independently to form a passage or be combined into
multiple passages of intelligent management, as shown in figure 2, at the same time; it may
be interconnected with management computer and fed back in real time the passing
condition of the passage and the turnstile status to the administrator, forming various kinds
of management report lists. The administrator may also carry out far end control of the
operation for the turnstile through the management computer.
Figure 2
5. Equipment Assembly and Installation
5.1 Equipment Installation
1) Prepare all the tools for installing the equipment and check the spare parts.