Turnstiles TPW-321ASP, Руководство по эксплуатации

Страница: 4 / 22

2
may be resulted.
5) The equipment is not equipped with explosion-proof design, and it is not allowed to
apply the equipment to an environment with danger of inflammable or explosion.
However, it is optional for the user to purchase products of other type for the purpose.
3. Product Description
3.1 Technical Details
1) The mechanism is locked until a valid open signal is received.
2) The system adopts the exclusive technique of clutch. As a result, the turnstile is more
accurate and reliable for zero point locking and unlocking.
3) The entire system runs smoothly, with a small noise and free of mechanical impact.
4) Two or one direction can be controlled by switch- button and access controller.
5) All controls are housed within the unit, therefore no separate switches or control boxes
are required.
6) It has failure self-detect and alarm indication function, facilitating maintenance and
application for the users
7) Control of the tripod is achieved usually by an electro-mechanism mounted within the
top section of the Automatic Swing Gate and accessible by open the Top Cover. Purely
mechanical control is also possible.
8) It is provided with multiple operation modes for selection. It can either read card in
double way for flow limit, or reading card in a way while barring in the other, more
over, the operation mode of turnstile may be set up with software.
9) The barrier of the Automatic Swing Gate can be open automatically when the power is
off.
10) The equipment is provided with a unified, standard electric interface and is available to
be integrated with various read/write facilities to facilitate the system integration. It is
able to realize far end control and management with the help of administrative
computer.
11) It is available to calculate automatically the number of personnel passing through the
passage and to display directly in LED for the administrator, who can understand very
clearly the personnel passing in a certain direction.
3.2 Main Technical Specifications
1) Power voltage: AC100~240V, 50Hz
2) Operation environment temperature: -15℃~ 60℃
3) Relative humidity: less than 95% not condensed
4) Passage width: 600mm